If your Ring camera night vision not working, don't worry. Users frequently experience this issue, especially after updating their software or setting a new device. Fortunately, there are a few simple steps you can take to fix this issue and resume seeing clear video at night.
1. Look Around You
Complete darkness provides the best conditions for night vision. If there is ambient light, such as from porch lights or streetlights, the infrared sensors could not work. Try shutting off nearby lights to see if night vision works.
2. Clean the camera's lens
Fingerprints, dust, or grime on the lens might interfere with infrared sensors. Wipe your Ring camera's lens carefully with a microfiber cloth.
3. Adjust the Configuration for Infrared
Open the Ring app and navigate to the camera settings. To activate infrared night vision, navigate to "Device Settings" > "Video Settings." You may toggle this feature on and off on some models.
4. Firmware update
Older firmware may have a number of issues, including issues with night vision. go to www ring.com login and choose "Device Health" to view your device's software status. Any available updates should be installed.
5. Switch on and off the camera.
Unplug your Ring camera or remove it and replace the battery if it is connected. Wait 30 seconds before restarting it. Often, this easy reboot resolves temporary software problems that cause night vision problems.
6. Check the Configuration of Your Ring Camera
If this is a new device, go over the initial Ring camera setup instructions once again. Make sure the device is installed correctly and pointed toward an area with little light pollution. Inaccurate placement or angle may affect night vision performance.
If your night vision feature isn't functioning properly, it might compromise your home security. By using these troubleshooting techniques, you can often fix the Night Vision Not Working issue without consulting a professional.
Always make sure your Ring camera setup is optimized for low light levels and maintain the gadget updated for best results.
Visit our website if you want further help.