The Eufy camera blinking red light is generally an indication that something is wrong with your equipment. Let's go over the possibilities and how to fix them.
What Does It Mean When the Red Light on My Eufy Camera Blinks?
In general terms, a red blinking light on your Eufy Camera indicates some connection problem. In most cases, it points out the Eufy camera offline or unable to establish a connection with the HomeBase or Wi-Fi, depending on your model. This can be caused by:
· Loss or weakness of Wi-Fi signal
· Wrong Wi-Fi password used during setup
· Power issues
· Unsuccessful firmware update
· Network or router alterations
Before you go off the handle, think of that red light as your cameraman asking for help: "Sir, please help me reconnect."
How to Fix the Red Light Blinking?
· Check for Wireless Connection: Make certain the Wi-Fi network in use is in fact working. Attempt to connect using some other device to verify.
· In case the wireless signal is weak, consider moving the camera closer to the router or the HomeBase.
· Unplug the camera, wait ten seconds, then plug it back in again. Sometimes, a simple reset resolves most of the issues on a device.
· Resetting the Power Bank: Consider doing a full reset Eufy camera when the red light is still on. Locate the small reset button, which almost always looks like a pinhole. Keep pressing down on the button for about 10 seconds or so, until the red light turns solid. Then in the Eufy Security app, proceed through the setup procedure again.
· Sometimes firmware updates are required to fix early issues or improve stability. Head to the device settings and open the app to look for firmware updates.
An Eufy camera blinking red is merely a sign that it needs troubleshooting-all else is fine. Most issues get fixed either by checking the connection or by resetting the Eufy camera, whether the camera is offline due to Wi-Fi problems or configuration errors.
If you have any other questions about the issue eufy camera offline, then please visit our website.